Creating a Surround for a Wooden Burning Stove

Published: 07th April 2011
Views: N/A

A surround for your wooden burning stove has a practical function as it safeguards non-combustible surfaces from the heat of the fire. Nonetheless, it also serves a ornamental purpose, with a array of prepared-to-fit surrounds accessible in a assortment of styles.

A fireplace is normally comprised of the hearth, the surround and the mantel piece while some wooden burning stoves are fitted straight into the chimney recess, with no will need for a surround. In this instance the stove by itself supplies a decorative element to the space, but a hearth is nonetheless needed for fire safety causes. With fire recesses, there are also Creating Rules relating to the surrounding walls.

Developing Laws

In accordance with creating rules a hearth should be fitted to defend non-combustible products from the warmth of the stove and from any accidental spillages of ash. The hearth by itself need to be made from a non-combustible materials, these kinds of as concrete or masonry.

There are set tips as to the dimension of hearths each for wood burning stoves fitted into a recess and for freestanding stoves. With recesses the hearth ought to attain at least 150mm previous the sides of the stove and 300mm in front, and with freestanding stoves the hearth must be at least 840mm x 840mm in dimension. The hearth must also be at minimum 125mm thick with a space of 50mm among the hearth and any combustible materials, or otherwise 250mm thick.

Surrounds really should also be built from non-combustible components, and if the stove is fitted into a chimney recess there are set needs concerning the thickness of the walls and the supplies that they are made from. For example, the walls of masonry chimneys ought to be at minimum 100mm thick, but if the walls separate the room from an additional compartment or dwelling, then they really should be a minimal of 200mm away from the internal surface of the flue liner or have a gap of 40mm from the outer surface of the chimney.

The fireside recess and the chimney really should also be produced from non-combustible content, and the internal walls really should be a minimum of 200mm in thickness. Flue measurements must also comply with Creating Regulations for security factors.

Any operate undertaken ought to be notified to your neighborhood arranging division so that they can make confident that all the specifications are getting met. Alternatively, you need to utilize a capable installer who will be familiar with Creating Rules.

If you get prepared-created hearths and surrounds from a specialist stove supplier, they will commonly ensure that these areas meet with Developing Rules. It is greatest to verify with the supplier to make positive although. For much more info about "woodburning stoves", you need to go to: woodburning stoves

Preparation

To match a fire surround you require to commence by marking the walls according to the measurements of the surround so that you can make confident it matches. Masking tape is valuable for this activity. Following, you require to mark wherever the studs are in the wall as the spacers will be fixed to these. The studs are the upright posts that type component of the framework of the wall. You will also want some non-combustible spacers, and screws to resolve the spacers to the wall studs.

Resources

Appropriate supplies for wood burning stove surrounds are cement board, slate, or granite tiles. For good reasons of security, wooden surrounds are not appropriate. However, offering all Building Rules have been complied with in terms of thickness and components relating to the chimney walls, then it is achievable to have a wooden mantel shelf. Numerous suppliers promote mantel shelves full with fittings in a range of woods and finishes. Once again, the mantel shelf must be a suitable distance from the stove and flue.

With some fire surrounds the mantle put forms portion of the surround as it juts out from the wall. As a result, you will not need to have to obtain a separate mantel shelf for these sorts of fire surrounds.

Fitting the Surround

Begin by correcting the spacers into the studs using screws. The goal of the spacers is so that there will be an insulating gap involving the wall and the encounter of the surround. You can then repair the fireplace surround, which ought to be manufactured from a non-combustible content. You do this by employing screws that are prolonged ample to fit via the spacers and then into the wall studs. There need to be a gap at the top and bottom so that air can warmth up and movement by means of the gap.

The moment you have fitted the surround, if it is not provided with a ornamental finish, you can beautify it utilizing a fire evidence content these kinds of as stucco, tiles or warmth-resistant paint. Don't forget to cover any surrounding places to shield them from spillages.

Fire surrounds come in a vast array of designs to complement any space in a range of supplies. You can pick from modern or conventional. Whichever type of surround you pick, it is guaranteed to increase the look of your wooden burning stove earning it a good focal stage for any environment.
Creating a Surround for a Wood Burning Stove

Report this article Ask About This Article


Loading...
More to Explore